IP address 192.168.0.1 - 192.168.0.l is the address of some home-use broadband router, it’s mainly the default value of a variety of D-Link and Netgear model routers. And you can change it using the network router management console at any time. 192.168.0.1 is a private IPv4 network address. Home-use router can use it to set up the default gateway.
How do I go to the address 192.168.0.1:
For your modem to access the user interface, by typing http://192.168.0.1 address manually to your browser toolbar, or you need to enter by copying. Also located in the content of our site, you can provide your access with the help of the login button. When performing this operation one of the most common problems is to make the incorrect password entry. Modem (router) If you don't know your username and password, what you can do easily, you can find out from the lower part of our writing.
What can you do if you ever forget your password by default?192.168.0.1 password reset:
Usually if we encounter password failure, the first step is have to reset the router settings. Use a toothpick or a needle against the hole on the back of the router, unplug the power of your router at the same time, then connect the network cable connected to the external network to WLAN port on the router, connect your computer to the LAN port on top of the router.192.168.0.1 router settings:
After the preparation work, we now enter ‘http://192.168.0.1’ (each router has its original IP and they are not same according to above instructions) on your computer’s browser. Then press enter, enter the user name and password, the initial user name is usually admin, 192.168.0.1 initial password is usually admin too(different routers are not the same), then click login, click Next, and now have all the router’s settings completed, and the rest is to restart the router.